Bannock: A Free Plan for an 8 ft Plywood Sailing Dinghy
George B. Buckley's 8 ft plywood dinghy takes a cat or sloop rig, oars or a small outboard, with a daggerboard.
Bannock is a small dinghy that wears several hats. George B. Buckley designed the 8 ft (2.4 m) boat in exterior plywood over a hardwood stem and transom framing, with a daggerboard for sailing. Rig it as a cat or a sloop, row it, or fit a small outboard. That flexibility makes it a great first sailboat, a handy tender, or a family project that grows with your skills.
Bannock at a glance
| Detail | Bannock |
|---|---|
| Type | Sailboat |
| Length | 8 ft (2.44 m) |
| Construction | Exterior plywood over hardwood stem and transom framing; daggerboard |
| Power | Cat or sloop sail rig, oars, or small outboard |
| Designer | George B. Buckley |
| First published | Boat Builder, p. 52 |
| Craft Print | No. 377 |
| Plan sheets | 7 |
A small boat that grows with you
Choosing between cat and sloop rigs lets you start simple with one sail, then add a jib once you are comfortable. The daggerboard slides up and down in its case, so you can lift it in shallow water. It is a dinghy that adapts to the sailor, not the other way round.
At 8 ft, Bannock is easy to lift, store and car-top. Exterior plywood over hardwood framing keeps the build straightforward, and seven sheets give plenty of detail. It is a good choice for anyone short on storage space, and a lightweight hull is also easier for younger sailors to launch, recover and handle on their own.
The original plan sheets
These are the 7 original sheets, scanned from the magazine. For building, use the full-size PDF in the download section below.







Who designed it
George B. Buckley drew Bannock for Boat Builder, page 52, and it was issued as Craft Print No. 377. The seven sheets cover the hull, daggerboard and both rig options.
Before you build
- Build the daggerboard case well bedded and leak-free, since it is the most common source of water in small dinghies.
- Start with the cat rig if you are new to sailing, then add the sloop's jib later.
- Fit buoyancy fore and aft so the dinghy floats level and can be bailed after a capsize.
Download the plan
All seven original Bannock sheets in one file, covering the hull, daggerboard and both rigs.
Download the complete plan (PDF, 7 sheets, 4.4 MB)
Tools for this
Comments
No comments yet. Be the first to say what you think of this post.