Skills Prompts

Popular categories

Ha'Penny: An 18 ft V-Bottom Outboard Cabin Cruiser Plan

John G. Kingdon's 18 ft V-bottom cruiser on white oak framing, reaching 23 mph and cruising at 19 on a 33 hp outboard.

Ha'Penny is a nimble cruiser with a sensible appetite for power. It is 18 ft (5.49 m) overall, 16 ft 11 in (5.16 m) on the waterline, with a 5 ft 7 in (1.7 m) beam. The V-bottom hull is built on white oak framing, and a single 33 hp outboard gives a top speed of 23 mph with a comfortable cruise of 19 mph. It is a good fit for weekend explorers who want shelter, decent speed and a hull that cuts cleanly through waves.

Ha'Penny at a glance

DetailHa'Penny
TypeCabin cruiser
Length18 ft (16 ft 11 in on waterline) (5.49 m)
Beam5 ft 7 in (1.7 m)
ConstructionV-bottom; white oak framing
Power33 hp outboard; 23 mph, cruising 19 mph
DesignerJohn G. Kingdon
First publishedp. 54
Plan sheets8

Efficient and sure-footed

A V-bottom parts the water rather than slapping it, so the ride stays more comfortable when the wind raises a chop. White oak framing gives the hull a strong, durable backbone, a traditional choice for boats meant to see years of steady use. It holds fastenings well and gives the cabin structure a firm base to build on.

The narrow 5 ft 7 in beam on an 18 ft hull keeps resistance low, which is why one 33 hp outboard is enough for a 19 mph cruise. That makes Ha'Penny economical to run and light enough to trailer, while its length still gives room for a small cabin and cockpit.

The original plan sheets

These are the 8 original sheets, scanned from the magazine. For building, use the full-size PDF in the download section below.

Ha'Penny cabin cruiser plan, sheet 1 of 8
Sheet 1 of 8
Ha'Penny cabin cruiser plan, sheet 2 of 8
Sheet 2 of 8
Ha'Penny cabin cruiser plan, sheet 3 of 8
Sheet 3 of 8
Ha'Penny cabin cruiser plan, sheet 4 of 8
Sheet 4 of 8
Ha'Penny cabin cruiser plan, sheet 5 of 8
Sheet 5 of 8
Ha'Penny cabin cruiser plan, sheet 6 of 8
Sheet 6 of 8
Ha'Penny cabin cruiser plan, sheet 7 of 8
Sheet 7 of 8
Ha'Penny cabin cruiser plan, sheet 8 of 8
Sheet 8 of 8

Who designed it

John G. Kingdon designed Ha'Penny, and the original article begins on page 54. The plan sets out the speeds achieved with a 33 hp outboard, giving builders a useful reference point when choosing a motor.

Before you build

  • Match the outboard to the 33 hp the plan quotes, and do not overpower the slim hull.
  • Seal the white oak framing well and keep the bilge dry, since oak dislikes standing water.
  • Fit cabin ventilation and a working bilge pump before the first overnight trip.

Download the plan

All eight original Ha'Penny sheets in one file, ready to print at full size or follow on a tablet in the shop.

Download the complete plan (PDF, 8 sheets, 2.6 MB)

Comments

No comments yet. Be the first to say what you think of this post.

Leave a comment

Comments are reviewed before they appear. Links are marked as user content.

Keep reading

All posts