Skills Prompts Hues

Popular categories

Scat Cat: A One-Person Monocoque Hydroplane Plan

A 103 in single-seat hydroplane with a monocoque hull and only two frames, quoted at over 60 mph with a 16 1/2 hp Champion.

Scat Cat is a tiny single-seater that feels much faster than it looks. The hull is 103 in (2.62 m) long and 57 in (1.45 m) wide, a monocoque built with only two frames and a sawn foreplate, skinned in three-ply fir over a spruce frame. It takes any outboard from 7 1/2 hp up to class D, and the plan reports over 60 mph with a 16 1/2 hp Champion Blue Streak. It is a thrilling build for a solo driver who wants pure speed.

Scat Cat at a glance

DetailScat Cat
TypeHydroplane
Length103 in (2.62 m)
Beam57 in (1.45 m)
Capacity1 person
ConstructionMonocoque hull, only two frames with sawn foreplate; three-ply fir over spruce frame
PowerAny outboard from 7 1/2 hp to class D; over 60 mph with a 16 1/2 hp Champion Blue Streak
DesignerWilliam D. Jackson
Craft PrintNo. 267
Plan sheets8

Why a monocoque

In a monocoque hull, the skin itself carries most of the load, so very little internal framing is needed. Scat Cat's two frames and sawn foreplate are enough because the fir plywood shell works as the structure, keeping weight remarkably low for a boat that sees such high speeds.

Low weight is exactly why a modest 16 1/2 hp engine can push it past 60 mph. The wide 57 in beam on a short hull gives a stable planing platform, and the broad engine range lets a driver start mild and move toward class D power with experience.

The original plan sheets

These are the 8 original sheets, scanned from the magazine. For building, use the full-size PDF in the download section below.

Scat Cat hydroplane plan, sheet 1 of 8
Sheet 1 of 8
Scat Cat hydroplane plan, sheet 2 of 8
Sheet 2 of 8
Scat Cat hydroplane plan, sheet 3 of 8
Sheet 3 of 8
Scat Cat hydroplane plan, sheet 4 of 8
Sheet 4 of 8
Scat Cat hydroplane plan, sheet 5 of 8
Sheet 5 of 8
Scat Cat hydroplane plan, sheet 6 of 8
Sheet 6 of 8
Scat Cat hydroplane plan, sheet 7 of 8
Sheet 7 of 8
Scat Cat hydroplane plan, sheet 8 of 8
Sheet 8 of 8

Who designed it

William D. Jackson designed Scat Cat, listed as Craft Print 267. Jackson drew many of the series' hydroplanes and runabouts, and this monocoque single-seater is among his most speed-focused small designs.

Before you build

  • Begin with an outboard at the 7 1/2 hp end of the range before moving toward class D power.
  • Bond the three-ply fir skin carefully to the spruce frame, since the monocoque relies on the skin for strength.
  • Always wear a helmet and life jacket and run in open water clear of other boats.

Download the plan

Scat Cat's eight original sheets come in one file, ready to print at full size or follow on a tablet in the shop.

Download the complete plan (PDF, 8 sheets, 1 MB)

Tools for this

Craft

Notes and documents app with tasks, calendar, whiteboards, an AI assistant and API and MCP connections.

Mentioned in this post

Craft

AI roleplaying game platform where players design worlds, rules, maps and characters and an AI Game Master runs the scenes.

Mentioned in this post

Games & FunFree plan

Comments

No comments yet. Be the first to say what you think of this post.

Leave a comment

Comments are reviewed before they appear. Links are marked as user content.

Keep reading

All posts