Skills Prompts Hues

Popular categories

Paddle Wheel Boat: A Free 1960 Hal Kelly Hand-Crank Plan

Hal Kelly's 1960 plywood box boat with a hand-cranked paddle wheel, buildable without power tools.

Here is a boat you can build with hand tools and a free weekend. Hal Kelly designed this simple plywood box hull with a paddle wheel in the middle, turned by a hand crank. There is no motor to fuss over and no tricky curves to fair. It is a cheerful project for a family or a youth group, and it brings back the charm of old paddle steamers in pocket size.

Paddle Wheel Boat at a glance

DetailPaddle Wheel Boat
TypePaddle boat
ConstructionSimple plywood box hull with central hand-cranked paddle wheel; no power tools needed
PowerHand-cranked paddle wheel
DesignerHal Kelly
First publishedMechanix Illustrated, March 1960
Plan sheets5

Why kids and grown-ups love it

A box hull is the easiest shape in boatbuilding: flat panels, straight cuts and simple joints. The plan is drawn so that no power tools are needed, which makes it a good first project for anyone without a full workshop. Basic hand tools, a few sheets of plywood and some patience are all it really asks.

The hand-cranked wheel sits in the centre of the boat, so the person turning it can watch it churn. It is slow, steady fun, ideal for a pond or a sheltered corner of a lake. Children love being in charge of the crank, and nobody needs a licence or fuel to enjoy an afternoon aboard.

The original plan sheets

These are the 5 original sheets from 1960, scanned from the magazine. For building, use the full-size PDF in the download section below.

Paddle Wheel Boat paddle boat plan, sheet 1 of 5
Sheet 1 of 5
Paddle Wheel Boat paddle boat plan, sheet 2 of 5
Sheet 2 of 5
Paddle Wheel Boat paddle boat plan, sheet 3 of 5
Sheet 3 of 5
Paddle Wheel Boat paddle boat plan, sheet 4 of 5
Sheet 4 of 5
Paddle Wheel Boat paddle boat plan, sheet 5 of 5
Sheet 5 of 5

Who designed it

Hal Kelly designed the Paddle Wheel Boat for Mechanix Illustrated, which published it in March 1960. Kelly drew a long run of small, home-buildable boats for American hobby magazines. The five sheets cover the box hull and the crank.

Before you build

  • Make the crank and paddle wheel turn smoothly on the bench first; any binding is far easier to fix before it is installed.
  • Seal all the plywood box seams well, as a flat-sided hull relies entirely on its joints to stay dry.
  • Use it on small, calm water close to shore, since a hand-cranked wheel cannot fight wind or current.

Download the plan

Hal Kelly's complete 1960 plan in one file: all five sheets, ready to print and take to the workbench.

Download the complete plan (PDF, 5 sheets, 1 MB)

Comments

No comments yet. Be the first to say what you think of this post.

Leave a comment

Comments are reviewed before they appear. Links are marked as user content.

Keep reading

All posts