Jolly Roger: A Tiny 8 ft Flat-Bottom Rowboat Plan
William D. Jackson's 8 ft flat-bottomed rowboat with hardwood keel and chines, built for oars or a small outboard.
Jolly Roger is about as small as a proper rowboat gets, and that is exactly its charm. At 8 ft (2.44 m), it is a pocket-sized flat-bottomed boat with a hardwood keel and chines and Weldwood plywood sides. You can row it or push it along with a small outboard. It makes a fine tender, a pond explorer or a starter boat for a young sailor, and its size means it will happily fit in a garage corner when the season ends.
Jolly Roger at a glance
| Detail | Jolly Roger |
|---|---|
| Type | Rowboat |
| Length | 8 ft (2.44 m) |
| Construction | Flat bottom; hardwood keel and chines, Weldwood plywood sides |
| Power | Oars or small outboard |
| Designer | William D. Jackson |
| First published | Boat Builder's Annual, p. 84 |
| Craft Print | No. 96 |
| Plan sheets | 4 |
Small boat, short project
An 8 ft hull keeps material costs and building time low, and the flat bottom avoids tricky bends. Hardwood in the keel and chines gives the edges real strength where a little boat takes most of its knocks, while the plywood sides keep weight down.
Being compact, it is easy to lift onto a car roof or into a pickup, which opens up small lakes and creeks that larger boats never reach. It is also a manageable way to learn the basics before taking on something bigger. Skills learned here, from fitting chines to fairing a keel, carry straight over to larger projects later.
The original plan sheets
These are the 4 original sheets, scanned from the magazine. For building, use the full-size PDF in the download section below.




Who designed it
William D. Jackson drew Jolly Roger, and it ran in the Boat Builder's Annual on page 84 as Craft Print 96. Jackson was one of the most prolific designers behind the Science and Mechanics Craft Print plans, with dozens of small boats to his name.
Before you build
- Keep any outboard genuinely small on an 8 ft hull, and mount it only on a transom built to the plan's specification.
- Choose straight-grained hardwood for the keel and chines, since knots there weaken the parts that take the most abuse.
- In a boat this short, place the rowing seat carefully so the bow does not dig in with one adult aboard.
Download the plan
Jolly Roger arrives as a single file containing all four original sheets, easy to print or keep open on a tablet while you build.
Download the complete plan (PDF, 4 sheets, 1 MB)
Tools for this
Comments
No comments yet. Be the first to say what you think of this post.