Buddy: A Free Plan for a 13 ft Semi-Vee Utility Boat
A 13 ft marine plywood utility boat for four that takes a 1 to 12 hp outboard, oars or a sail rig.
Buddy lives up to its name: an easygoing, all-round companion for a lake house or fishing camp. The hull is 13 ft (4 m) long and 4 ft 8 in (1.4 m) wide, with a semi-vee bottom and room for four passengers. Hang an outboard on it, row it, or rig it for sail; it is happy any of those ways. If you want one boat to cover a little of everything, this is a strong candidate.
Buddy at a glance
| Detail | Buddy |
|---|---|
| Type | Utility boat |
| Length | 13 ft (3.96 m) |
| Beam | 4 ft 8 in (1.42 m) |
| Capacity | 4 passengers |
| Construction | 1/4 in. Weldwood marine plywood over sawed frames; semi-vee bottom |
| Power | Outboard 1 to 12 hp; can also be rowed or rigged for sail |
| First published | Boat Builder's Annual, p. 116 |
| Craft Print | No. 104 |
| Plan sheets | 8 |
Why it is such a good all-rounder
Quarter-inch Weldwood marine plywood over sawed frames is a proven, sturdy way to build a small boat. The semi-vee bottom gives a softer ride than a flat bottom, which helps when the wind kicks up a chop. Sawed frames also give you solid points to fasten seats, oarlocks and other fittings.
Power choices are unusually wide, from a 1 hp outboard up to 12 hp, plus oars or a sail rig. That means Buddy can be a quiet rowing boat one day and a quick run across the lake the next. Few small boats offer this much flexibility from a single set of drawings.
The original plan sheets
These are the 8 original sheets, scanned from the magazine. For building, use the full-size PDF in the download section below.








Before you build
- Stay within the 1 to 12 hp outboard range and fit a sturdy transom knee if you plan to run near the upper limit.
- Add enough buoyancy under the seats to keep a swamped hull afloat with four people aboard.
- If you plan to sail later, build in the mast step and centreboard or leeboard mounts now rather than retrofitting.
Download the plan
All eight original Buddy sheets in one file, covering frames, planking and every power option, ready to print.
Comments
No comments yet. Be the first to say what you think of this post.